INFOSEC UPS SYSTEM M5T Series User Manual page 120

➢ PARAMETERS: After clicking "PARAMETERS", it will pop up a message screen as
shown in above screen. T
this operation and back to
➢ CALI: After clicking "CALI", it will pop up a message board as shown in above screen.
Touch "YES" to restore default calibration value. Touch "Back" or "No" to cancel this
operation and back to INITIAL menu page.
➢ EEPROM: After clicking "EEMPROM", it will pop up a message board as shown in above
screen. Touch "YES" to clear all setting value in EEPROM. Touch "Back" or "No" to
cancel this operation and back to INITIAL menu page.
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 Sautron, France – www.infosec-ups.com
119
Hotline : +33 (0)2 40 76 15 82 – Fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 02 22 AA 59 203 08
ouch "YES" to restore default value
INITIAL menu page.
INITIAL → CALI Page
INITIAL → EEPROM Page
Touch "Back" or "No" to cancel
.