Electrical Work; Monitoring Devices; Installing/Dismantling; During Operation - Wilo Control MS-L Installation And Operating Instructions Manual

Table of Contents

Advertisement

en
2.3

Electrical work

2.4

Monitoring devices

2.5

Installing/dismantling

2.6

During operation

12
Installation/dismantling: The technician must be trained in the
use of the necessary tools and fixation materials for the relev-
ant construction site.
Operation/control: Operating personnel must be instructed in
the functioning of the complete system.
Definition of "qualified electrician"
A qualified electrician is a person with appropriate technical edu-
cation, knowledge and experience who can identify and prevent
electrical hazards.
Electrical work must be carried out by a qualified electrician.
Before commencing work, disconnect the product from the
mains and safeguard it from being switched on again.
Observe applicable local regulations when connecting to the
mains power supply.
Adhere to the requirements of the local energy supply com-
pany.
Earth the product.
Observe technical information.
Replace a defective connection cable immediately.
Circuit breaker
The size and switching characteristics of the circuit breakers must
conform to the rated current of the connected consumer. Ob-
serve local regulations.
Locally applicable laws and regulations on work safety and ac-
cident prevention must be complied with.
Disconnect the product from the mains and secure it against
being switched on again.
Suitable fixation material must be used for the existing bearing
surface.
The product is not watertight. Select an appropriate installation
site!
Do not deform the housing during installation. Seals could leak
and affect the stated IP protection class.
The product may not be installed in potentially explosive areas.
The product is not watertight. Comply with protection class
IP54.
Ambient temperature: -30 ... +60 °C.
Maximum humidity: 50 %, non-condensing.
Do not open the switchgear.
The user must notify the person in charge of every fault or ir-
regularity immediately.
In case of damage to the product or connection cable, switch
off the product immediately.
Installation and operating instructions • Wilo-Control MS-L • Ed.02/2022-05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Control MS-L and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Control ms-l-ls series

Table of Contents