Table of Contents
Advertisement
LAUNCH
5.2 POWER
After correctly connecting the power cable to the two poles
of auto battery (12V), the instrument will start self-testing.
The screen will show all the characters (see Fig.2). You
would hear one 'bee' sound confirming the instrument in
normal condition. Then the screen will display "P" character
for the six functions select use
5.3 SCREEN
The each part of the screen means as follows (see Fig.2):
1)
Display the maximum value only for voltage, resistance
and frequency testing.
2)
Display the minimum value only for voltage, resistance
and frequency testing.
3)
Display measure result or input value
4)
Unit display area（display corresponding unit according
to different range）
5)
Dynamic voltage value display bar as the horizontal
cursor length (only for voltage measurement )
6)
Measurement and simulation function icons from left to
right are: voltage measurement icon, resistance
measurement icon, frequency measurement icon,
voltage simulation icon and frequency simulation icon.
Note: The function is activated when the outline
border of the icon is lit.
E-6
STS600
Advertisement
Chapters
Table of Contents
