Removing The Cover - gb PLATINUM Vaya i-Size Short Instruction

25
26
44

REMOVING THE COVER

Removal
The cover consists of 7 components fixed to the seat
shell by hook and loop fastener, elastic piping, snap
buttons and brackets. Once you have released all the
fastenings, you can remove the individual components
20
for washing.
NOTE! Before detaching the cover please pull out the
elastics under silver decorative parts to avoid damage.
Proceed as follows:
• Open the belt buckle 20 of the 5-point belt system.
• Open all snap buttons of the pads and cover parts 25.
• Unhook the shoulder pads from the brackets 26.
• Remove all belt pads.
• Thread the shoulder belts out of the cover.
• Remove the cover by pulling it forwards.
• To fix the cover again on the seat carry out the steps in
reverse order.
NOTE! When remounting the shoulder pads, it is
essential to ensure that ...
• the closed side faces towards the childs neck.
• the shoulder pads are perfectly mounted on the
brackets 26.
• the shoulder belts are guided inside the shoulder pads
!
WARNING! The cover is an integral component
of the car seat's safety design. The car seat must
therefore never be used without the cover.