Installing In Vehicle - gb PLATINUM Vaya i-Size Short Instruction

CLICK!
2
3
4
7
20

INSTALLING IN VEHICLE

3
4
NOTE! If your vehicle does not have an i-Size seating
position, please check the vehicle typelist that is included.
• Please select an appropriate seat in the vehicle.
• Unfold the support leg 2 until it locks.
• Release the lock of the ISOFIX connectors. Both
• The ISOFIX connectors 5 have to lock into the ISOFIX
• Make sure that the seat stays firmly in place by trying
6
• The green safety indicator 7 must be clearly visible on
5
• Next, push the seat in the direction to the backrest
NOTE! The ISOFIX anchorage points 6 are two metal
lugs per seat and are located between the backrest and
the seat of the car. If you are in any doubt, consult your
car's instruction manual for assistance.
• If the ISOFIX anchorage points 6 in your car are difficult
8
6
• If necessary attach the connect guides 8 provided
NOTE! Do not put any objects in the foot area in front
of the child seat.
locks can be adjusted independently. Push both
buttons 3 and 4 simultaneously and pull the ISOFIX
connectors out of the base to the endstopper.
anchorage points 6 with an audible "CLICK".
to pull it out of the ISOFIX connect guides.
both ISOFIX release buttons.
until it is fully aligned with the backrest.
to access, you should use the connect guides 8 provided
in order to avoid damaging the cover.
with the longer lug pointing upwards into both ISOFIX
anchorage points 6. In many cars it is more effective to
install the connect guides 8 in an opposing direction.