Table of Contents
Advertisement
Quick Links
MULTI ELEMENT CARTRIDGE FILTER
Installation and Operation Manual
EMAUX WATER TECHNOLOGY CO., LTD
USER MANUAL
STRIVE FOR CLEAR WATER
www.emauxgroup.com
Models: ICF 230 / 330/ 430 / 530 / 680
EMFI22032602
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for emaux ICF 230
Summary of Contents for emaux ICF 230
- Page 1 MULTI ELEMENT CARTRIDGE FILTER Installation and Operation Manual EMAUX WATER TECHNOLOGY CO., LTD USER MANUAL STRIVE FOR CLEAR WATER www.emauxgroup.com Models: ICF 230 / 330/ 430 / 530 / 680 EMFI22032602...
- Page 2 (e) by modification of the product; (f) as a result of war or terrorist attack; or ..1. OVERVIEW (g) as a result of service by anyone other than Emaux authorized reseller or authorized agent. 1.1 PRODUCT INFORMATION 1.2 DIMENSIONS ..
- Page 3 This filter must be installed by a licensed or certified electrician or a qualified pool serviceman in accordance with the Local Code and all applicable local codes and During the warranty period, Emaux authorized reseller will repair or replace defective parts with new parts or, at the ordinances.
- Page 4 Do not operate the filter until you have read and understand clearly all the operating 7. SPARE PART LIST instructions and warning messages for all equipment that is a part of the pool circulating system. The following instructions are intended as a guide for initially operating the filter in a general pool installation.
- Page 5 In areas where subfreezing temperatures can be expected, the filter should be drained to protect the filter from damage. FT² M² M /H 1.The filter should be disassembled and the filter cartridges elements cleaned or replaced. 9140404 ICF 230 21.37 19.6 2.Follow directions under FILTER DISASSEMBLY INSTRUCTIONS 3.Then follow REMOVING CARTRIDGES per instructions 9140405 ICF 330 30.73...
- Page 6 4.Making sure the stopper of the flange is in the open position. 5.Verify the MAR discharge points away from all electrical connections. REQUIRED CLEARANCE MODEL “B” side “C” above Flange stopper Pressure gauge ICF 230 32.6 82.9 18.1 11.02 ICF 330 34.88 88.6 18.1...
- Page 7 Notice: Do not use any petroleum solvents to clean filter components 3. STARTING THE PUMP AND FILTER SYSTEM Do not lubricate sealing O ring. If the O ring is damaged, it must be replaced 3.1 BEFORE STARTING THE PUMP 1.Use ONLY ICF system components; Locking Ring unit doing assembly, metal-reinforced seal. Non-tighten 4.4.3 BODY AND LOCKING RING REASSEMBLY locking ring components may fail in use and cause explosive component separation.
- Page 8 3.2 STARTING PUMP 4.1 FILTER DISASSEMBLY INSTRUCTION Stand clear of pump during start-up 1.Turn off all system circulation pumps and all-electric power on the equipment pad. 2.Set all system valves in a position to prevent water flow to the filter. Pool and spa circulation systems operate under high pressure.
Need help?
Do you have a question about the ICF 230 and is the answer not in the manual?
Questions and answers