Clas Ohlson EBAWPO-03010301 Instruction Manual

Electronic Bite Indicator
Art.no 31-3006 Model EBAWPO-03010301
Please read the entire instruction manual before use and save it for future reference. We reserve the right
for any errors in text or images and for making any necessary technical changes to this document. If you
should have any questions concerning technical problems please contact our Customer Services.
3
2
1
1. Threaded stud for attaching to holder such as 31-3005.
2. On/off switch and volume control.
3. LED – flashes and changes colour when fish bite.
4. Sensor wheel – indicates movement in the fishing line.
5. Tone control – different tones can be used for differentiating between rods when several bite
indicators are used at the same time.
6. Battery compartment – Inset 2x LR03/AA batteries (alkaline) into the battery compartment according
to the markings on the back (batteries not included).
Use
1. Mount the bite indicator on a rod holder (Clas Ohlson art. no 31-3005 or
another holder with a 3/8 BSF thread).
2. Place the line onto the sensor wheel (4).
3. Turn the on/off switch (2) to on and adjust the volume.
4. Jerk the line a little to activate the bite alarm and then set the desired tone using the tone control (5).
5. A bite is indicated by the alarm buzzer sounding and the LED (3) flashing and changing colour.
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
4
+
5
6
-
-
+