4 Use your
Soundbar
This section helps you use the Soundbar
to play audio from connected devices.
Before you start
Make the necessary connections
•
described in the quick start guide
and the user manual.
Switch the Soundbar to the correct
•
source for other devices.
Turn ON and OFF
When you first connect the unit to
•
the main socket, the unit will be
in STANDBY mode. The STANDBY
indicator will light up white.
Power
Action
State
On
Press the
Semi
button
Standby
once.
Press the
Eco
button
Standby
once.
Wi-Fi is
(
Power LED
on)
turns on.
Press and
hold
Eco
button 2
Standby
Wi-Fi is
seconds.
(
off)
Power LED
turns on.
Auto Standby
The unit automatically turns to Standby
mode after about 15 minutes if the TV or
the external unit is disconnected (or USB,
BT, Airplay 2 and Chromecast for Audio
Function
•
Follow source state
•
Wi-Fi is still on.
•
It still supports Airplay 2 and
Chromecast for Audio.
•
Wi-Fi is on.
•
The product enters the lower
power consumption mode.
•
Restarting the system will take
a relatively longer time.
•
Wi-Fi is off.
•
The product enters the lower
power consumption mode.
•
Restarting the system will take
a relatively longer time.
function bit playback pause), switched
off.
To switch the unit off completely,
•
remove the mains plug from the
mains socket.
Please turn the unit off completely to
•
save energy when not in use.
Select Modes
1
Press the
button repeatedly on
the unit or on the remote control to
select the eARC/ARC, OPT, AUX, USB,
BT, HDMI 1, HDMI 2 mode.
» The selected mode will show on
the display.
» Airplay 2 and Chromecast for
Audio is not an optional source.
Need to be directly controlled by
APP.
Adjust the Volume
Adjust Soundbar, Subwoofer and
Surround R/L's Volume
1
Press Vol+/Vol- (Volume) to increase
or decrease a volume level.
To mute sound, press Mute.
•
To restore the sound, press
•
Mute again or press Vol+/Vol-
(Volume).
While adjusting the volume of Soundbar,
the volume of Surround R/L and
Subwoofer will be adjusted at the same
time.
23 EN