Philips 8000 Series User Manual page 25

BASS
Adjust the Bass Level.
» BAS -5 ~ BAS +5
» By default, the Bass is set to 0.
TREBLE
Adjust Treble Level.
» TRB -5 ~ TRB +5
» By default, the Treble is set to 0.
SYNC
This function is only available for sources :
HDMI 1/HDMI 2/ARC/Optical)
Set the Audio Delay.
Video image processing, sometimes
•
longer than the time required to
process the audio signal. This is called
"delayed." Audio Delay feature is
designed to remedy this delay.
Set the audio delay, provided only
•
for the current playback mode. (As
provided in the HDMI ARC audio delay
mode, the delay mode is valid only for
the HDMI ARC).
» AV00 ~ AV200
» By default, the audio delay is set
to 00.
CHVOL(C)->
Adjust the Center Channel Gain.
» CT -5 ~ CT +5
» By default, the center channel
Gain is set to 0.
CHVOL(SL)->
Adjust the Surround Left Channel Gain.
» SL -5 ~ SL +5
» By default, the surround left
channel Gain is set to 0.
CHVOL(SR)->
Adjust the Surround Right Channel Gain.
» SR -5 ~ SR +5
» By default, the surround right
channel Gain is set to 0.
DIM
Set display brightness.
» HIGH / MID / LOW.
» By default, the dimmer is set to
MID.
DISP XXX
Set to turn off the display automatically
(except the Wi-Fi LED indicator) after 3
seconds of idle when no user operation.
» ON: Set to display on
» OFF: Set to display off
» By default, the display is set to
ON.
BT PAIR (NOTE 1)
At BT Source :
» Long press 3 secs and release
SOURCE key to trigger BT pairing.
» Long press 8 secs will clear pairing
info.
MANUAL UPGRADE
» a. Download TAB8967 firmware
from P4C website.
b. Download TAB8967 firmware
from server :
After triggered manual upgrade
via Settings menu, Soundbar will
check if new firmware is available
in the USB flash drive. Once new
firmware is detected, Soundbar
will show "UPDATE FROM USB"
25 EN