Steel Pipes And Flexible Hoses; Rupture Valve - MP sava3 Technical Manual

1.4. Steel pipes and flexible hoses

Avoid up and down
curves in the course of

1.5. Rupture valve

Remove the protective plate and seal paper
Check the o-ring seal
is properly placed in
its housing
V700 - 11/2017
FLEXIBLE HOSE ONLY
Recommended for lengths ≤ 10 m
the hose
Avoid leaving the hose completely straight
6/40
MP sava3 Hidraulic Power Unit 1 ¼" 1 ½"
FLEXIBLE HOSE AND
Fix steel or flexible pipe.
Use the cap nut and cutting ring
for steel pipe or flexible hose
with steel tube end
MTMECMPsava3_700_EN
STEEL PIPE
IMPORTANT:
Use for lengths > 10 m.
Assemble a piece of Flexible Pipe
behind the Rupture Valve as well as
between the Rigid Pipe and Power
Unit.
In case of double cylinder installation,
connect the rupture valves each other
by using a Ø6mm steel pipe (fitting
box).