Hydraulic Circuit Mp Sava3 Valve Block With Soft-Stop According To European Directive 2014/33/Eu - MP sava3 Technical Manual

2.1.3. Hydraulic circuit MP sava3 Valve Block with Soft-Stop according to European Directive 2014/33/EU

MP sava3 Valve Block
VR. Non return valve
VA. Starting valve
VD. Bypass valve
VC. Flow regulator valve
VB. Descent valve
YR. Electrovalve for changing speed
YD. Descent Electrovalve
Δ
YS. - Starting Electrov. (YS-A3 2014/33/EU) Integrated Soft-Stop
Y
VP. Balancing down pressure switch
VL. Pressure relief valve
CP. Maximum pressure switch (optional)
VM. Manual descent valve
VG. Valve to control the minimum pressure in cylinder
V700 - 11/2017
svc
Screw 1: Pressure relief valve adjustment (maximum pressure)
Screw 2: Upwards acceleration adjustment.
Screw 3: Upwards/downwards deceleration adjustment.
Screw 4: Levelling speed adjustment.
Screw 5: Down speed adjustment.
Screw 6: Hand pump relief valve adjustment.
Screw 7: Cylinder minimum pressure adjustment.
SVC: YS-A3 Valve magnetic Sensor.
SVD: Descent Valve YD magnetic Sensor
10/40
MP sava3 Hidraulic Power Unit 1 ¼" 1 ½"
Return filter-Shut-off valve
Rupture valve
SVD
Hand pump
MTMECMPsava3_700_EN