Download Print this page

Gentec Single Lever Basin Mixer GPN1000 Installation Manual page 15

Stainless steel single lever mixers

Advertisement

4.5 However, nothing in this clause will prevent
You from exercising any rights which You may
have under the Competition and Consumer
Act 2010 or any other law which cannot by
law be excluded or modified by agreement.
5. Notices
5.1 Any notice in connection with this
document must be given in writing.
5.2 Any notice in connection with this
document is taken to be received:
5.2.1 if hand-delivered, on delivery;
5.2.2 if faxed, at the local time (in a
place of receipt of that fax) which
then equates to the then time at
which the fax is sent as shown on the
transmission report which is produced
by the machine from which that fax is
sent and which confirms transmission
of that fax in its entirety unless that
local time is not a Business Day, or is
after 5pm on a Business Day, in which
case that communication will be
deemed to have been received at 9am
on the next Business Day;
5.2.3 if emailed, at the local time
(in a place of receipt of that email)
which then equates to the then time
at which the email is sent as shown
on the transmission report which is
produced by the computer from which
that email is sent and which confirms
transmission of that email in its entirety
unless that local time is not a Business
Day, or is after 5 pm on a Business Day,
in which case that communication will
be deemed to have been received at 9
am on the next Business Day; and
5.2.4 if posted, seven (7) days after
being placed in the post; unless a later
date is specified in it, and takes effect
on the date it is taken to be received.
*Service inspections at regular intervals especially in high usage areas will assist in optimising
the operational life of the product.
www.gentecaustralia.com.au
5.3 The address for any notice to be
delivered to the Principal is as follows:
Unit 6 20-28 Ricketty St,
Mascot, Sydney, NSW 2020
info@gentecaustralia.com.au
P: +612 9319 4422
F: +612 8088 7635
14

Advertisement

loading