Table of Contents
Advertisement
Helix Operator's Manual
Product Cabinet Inspection
M
M
ONTHLY
AINTENANCE
Condenser Cleaning
S
-A
M
EMI
NNUAL
AINTENANCE
Water System Inspection
Publication Number: 621058497OPR
Open the product cabinet and pull out the bottom two product trays. Check for any
spilled product. Use cleaning solution and a clean cloth to remove any spilled product.
The following procedures should be performed on a monthly basis.
• All weekly maintenance tasks
• Condenser cleaning (ice maker and product cabinet)
• Water feed reservoir inspection
• Ingredient sanitation
• Ice Maker sanitation
The condensers should be cleaned at least once a month (more often in harsh envi-
ronments). To clean the condensers, use a soft brush, vacuum cleaner or blow out
the condenser from the inside using compressed air.
The following procedures should be performed on a semi-annual basis.
• All weekly and monthly maintenance tasks
• Inspect and service water system
• Inspect tubing
• Check for condensation
• Check safety circuits
• Check for vibration/noise
• Inspect upper bearings on auger assembly
Check for water leaks in all of the tubing connections, water fittings and the lower ice
maker water seal.
- 30 -
© 2012-2014, Cornelius Inc. All Rights Reserved
Advertisement
Table of Contents
