Ingredient Sanitation - Cornelius HELIX Operator's Manual

Helix Operator's Manual

Ingredient Sanitation

Publication Number: 621058497OPR
The ingredient sanitation is automatically started after selecting the weekly product tab.
To sanitize the ingredients, perform the procedure in Table 5.
Step
1 Wash and sanitize hands or use clean rubber gloves.
2 Select the Sanitization Selection screen, shown in Figure 7 on page 14.
3 Select the weekly product tab to sanitize ALL ingredient trays and lines.
Press the Play button to start the sanitation process. Follow the steps
4
shown on the screen to complete the sanitation process.
- 14 -
Sanitize Button
Figure 7.
Figure 8.
Table 5.
Action
© 2012-2014, Cornelius Inc. All Rights Reserved