Recording and Checking Messages
Using the Recording Options
You can use the options below while recording. To hear these options
while recording, just press zero. NVM-Series pauses the recording and
lists the options. You can select an option any time during the listing.
Note: NVM-Series does not play the recording options when you
press zero while recording a reply to a message or while record-
ing a message after making an intercom call. Automated
Attendant callers may be able to can press
recording, then press zero to hear the recording options.
To pause recording
To continue recording
after a pause
To Backup a few sec-
onds and listen to the
recording
1. Press
.
You hear: Recording has been
paused. To continue recording press
the star key. You can continue record-
ing or select another recording option.
1. Press
.
You hear: Recording, beep.
2. Start speaking after the beep.
You can do this only if you started record-
ing by pressing R or RS, or if you are
recording a comment to a message you are
going to forward.
1. Press B (2).
The recording plays, then pauses. You
can press
you can select another option.
If you wish, you can edit the recording
while its playing: Just press
the playing, then press
record from that point on.
The backup time is normally 5 seconds.
to pause their
to continue recording or
again to re-
to pause
43