Removing The Memory Extender Board - HP Integrity rx4640 Upgrade Manual

Converting SCSI Configuration from Simplex to Duplex

Removing the Memory Extender Board

Removing the Memory Extender Board
The memory extender board is located directly under the top cover of the chassis. The standard memory
extender board can hold up to 16 DIMMs. The high capacity memory extender board can hold up to 32
DIMMs.
To remove a memory extender board, perform the following steps:
Step 1. Press each latch on the two extraction levers located on each side of the memory extender board.
Step 2. Pull on the extraction levers to unplug the memory extender board from the socket located on the
midplane riser board and remove the memory extender board from the chassis.
14
Chapter 2