Table of Contents
Advertisement
Chapter 1: Instruction
1.1 - Overview
This Dual Port GbE NIC card P1103/P1103B based on Broadcom dual port
GbE transceiver, is a generic of 4 x PCI-E 1.1 card providing 2 GbE copper
interfaces with RJ45 connectors.
P1103/P1103B has a cut through option which provides LAN1 to LAN 2 cutting
through when system power down or is controlled by system software.
Remember to visit TYAN
information on all TYAN
drivers, etc.
1.2 - Product Features
P1103/P1103B offers the following features:
Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10
Mbps (10Base-T) operation.
Nway auto negotiation automatic sensing and switching between 1Gbps full
duplex and 100/10 Mbps operations half duplex or Full Duplex.
Host Interface standard support
Host Interface PCI-Express 4X Lane (Version 1.0a).
High performance, reliability, and low power use in Broadcom 5715 /5714 /
5704 dual integrated MAC + PHY and SERDES chip controller.
Hardware acceleration that can offload tasks from the host processor. The
controllers can offload TCP/UDP/IP checksum calculations and TCP
segmentation.
Jumbo Frame (9KB).
802. X flow control.
Statistics for SNMP
RJ-45 female connectors.
LEDs indicators for link/Activity/Bypass Mode status.
Priority queuing-802.1p layer 2 priority encoding.
Virtual LANs-802.1q VLAN tagging.
Independently copper Gigabit Ethernet channels support two Gigabit
Ethernets (1000Base-T)/Fast Ethernet (100Base-Tx)/Ethernet (10Base-T).
Ultra deep, 64 KB packet buffer per channel lowers CPU utilization.
®
's website at http://www.tyan.com, where you can find
®
products with FAQs, online manuals and updated
5
http://www.tyan.com
Advertisement
Table of Contents
