TYAN P1103 Manual page 29

4. Set watchdog relative parameter
SYNOPSIS
./bpc [-d SMBUS_ADDR] [-t TimeoutValue] [-p 0/1/2] [-q 0/1/2] [-s]
Description
-d SMBUS_ADDR
-t TimeoutValue
-p 0/1/2
-q 0/1/2
-s
5. Get the PassThru FW version and help information
SYNOPSIS
./bpc [-d SMBUS_ADDR] [-v]
Description
-d SMBUS_ADDR
-v
./bpc [-h]
Description
-h
Set the watchdog relative parameter of NIC card with
SMBUS_ADDR
Specify the SMBus address of NIC card.
Set the watchdog timer time out value to TimeoutValue.
Set the state of NIC card when system power on.
0 (normal) or 1(disconnect) 2(ByPass)
Set the state of NIC card when system enters into S5.
0 (normal) or 1(disconnect) or 2(ByPass)
Save the configuration of specified NIC card.
Get the version information of PassThru FW.
Specify the SMBus address of NIC card.
Get the version information of PassThru FW.
Get this help message.
Get help information.
http://www.tyan.com
29