TYAN P1103 Manual page 28

Application on RHEL 5.3 x86/x64, Cent OS 5.2 x64, Cent
OS 5.3 x86/x64, SLES 10 SP2 x64, SLES 11 SP2 x86/x64
Provide current NIC card status for user, and save configuration user
requested to corresponding configuration file
Note: ByPass watchdog timer timeout value can be changed only when the
bypass is on enable mode.
Command line input parameter definition:
Open the terminal and enter the ByPass directory:
#cd /usr/bypass
1. Get current status
SYNOPSIS
./bpc [-d SMBUS_ADDR] [-g]
Description
-d SMBUS_ADDR
-g
2. Force NIC card into normal, disconnect or ByPass mode
SYNOPSIS
./bpc [-d SMBUS_ADDR] [-f 0/1/2]
Description
-d SMBUS_ADDR
-f 0/1/2
3. Disable the watchdog
SYNOPSIS
./bpc [-d SMBUS_ADDR] [-c] [-s]
Description
-d SMBUS_ADDR
-c
-s
Get the state of NIC card with SMBUS_ADDR.
Specify the SMBus address of NIC card.
Get NIC card current state.
Force NIC card with SMBUS_ADDR into some state.
Specify the SMBus address of NIC card.
Force NIC card into some state.
0 (normal) or 1(disconnect) or 2(ByPass)
Disable the ByPass watchdog function of NIC card with
SMBUS_ADDR.
Specify the SMBus address of NIC card.
Disable the ByPass watchdog function of NIC card.
Save the configuration of specified NIC card.
http://www.tyan.com
(e.g.ByPass_40,
28
ByPass_42...).