Lcd Display Introduction - EcoFlow RIVER Pro User Manual

Hide thumbs Also See for RIVER Pro:
Table of Contents

Advertisement

12. X-Stream Charging Input Port
Plug in the AC Charging Cable into the port and connect the AC Charging Cable to an AC power source. The
U.S. and Japanese version support 100Vac-120Vac (50Hz/60Hz) / international version supports 220Vac-
240Vac (50Hz/60Hz) charging.
13. Overload Protection Switch
When the input current continuously exceeds 10A during a charge, the AC charging port will trigger the
overload protection (the Overload Protection Switch button will automatically pop out). When the product is
confirmed to be normal, press the overload protection switch button to continue charging.
14. Solar Charge/Car Charge Input Port
Connect at most two 110W solar panels in parallel to recharge RIVER Pro. RIVER Pro supports a solar input of
10-25V, 200W, 12A Max. RIVER Pro supports 12V car charge up to 8A. (Remember to start the engine when you
charge via car charge, otherwise, the car battery may be drained.) Do not use the same cigaratte lighter port to
charge other devices when recharging RIVER Pro. The RIVER Pro outlets can still be used to charge your devic-
es when the RIVER Pro is recharging via car charge.
15. Power Earth Screw
For safety reasons, some eletrical appliances need to be grounded. The power earth screw provides an option to
get your RIVER Pro grounded using a grounding cable.
16. Expansion Power Port
Plug in the Expansion Power Cable into this port to connect your RIVER Pro to a RIVER Pro Extra Battery to
expand the battery capacity to 1440Wh.
LCD Display
j
m
k
l
Autogoods "130"
n
o
p
i
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Efriver600pro-eu

Table of Contents