Forging Mount FM9180-B Quick Manual

TILTING
TV WALL MOUNT
For 32– 80" (81.3 – 203 cm ) TVs
Model FM9180-B
7/16 in.
(11 mm)
Electric
Tape Socket
Measure Pencil Screwdriver Drill Wrench
8
1/ in.
(3 mm)
Wood
Stud Finder Awl Drill Bit Hammer
STEP 1-1
Select TV Screw Diameterr STEP 1-2
r
If your TV has a flat back, AND you want your TV closer
Hand thread screws into the threaded inserts
on the back of your TV to determine which to the wall, use the shorter screws
M4, M6, or M8
screw diameter ( ) to use.
Use the spacers and longer s crews
• Round/irregular back TVs
• TVs with inset mounting holes
M4 M6 M8
• Extra space needed for cables
A
Does your TV
weight more than 130 lbs. (59 kg) ?
No — Perfect!
Yes — This mount is NOT compatible.
WARNING:
capacity can result in serious personal
injury or damage to equipment! It is the
installer's responsibility to make sure the
weight of the TV (with accessories) does
not exceed 132 lbs (60 kg).
WARNING:
This product
contains small items that could
be a choking hazard if swallowed.
Before starting assembly,
verify all parts are included
and undamaged. If any parts
are missing or damaged, do
not return the damaged item to
your dealer; contact Customer
Service.
Never use damaged parts!
3/8 in.
(10 mm)
NOTE: Not all parts and
Concrete
Drill Bit hardware included will be used.
Select TV Screw Length
( ).
A
( B) to accommodate:
adequate thread
engagement with t he screw
B
washer/spacer combination
AND TV bracket .
- Too short will not hold the TV.
- Too long will damage the TV .
FLAT BACK ROUND BACK INSET HOLES CABLES
What is your wall made of?
(including accessories)
Drywall with
wood studs?
130 lbs.
(59 kg) Perfect!
Exceeding the weight
Solid concrete or
concrete block?
level
Wall Plate
TV Bracket
TV Bracket
(Left)
(Right)
06
VELCRO TIE
x1
01
HDMI Cable
02 x1
Connection Plate Screws
M5 x 8mm 04 x1 05 x1
x4
03
STEP 1-3 Attach the TV Bracket STEP 1-3 Attach TV Brackets
Standard configurations
are shown. For special
applications, or if you
Center the TV brackets
are uncertain about your
hardware selection,
NOTE: The tilt tension knobs
you can see online:
Install using the screw/washer/spacer combination (a) or (b) you selected for your TV.
www.forgingmount.com
CAUTION:
Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only
enough to secure the TV bracket to the TV. DO NOT overtighten the screws.
CAUTION:
Verify
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
/
IMPORTANT:
After attaching the
brackets, adjust
Too Short
the straps so they
are level with the
bottom of the TV.
Correct
Too Long
Please read
through these instructions completely to be sure you're comfortable with
this easy install process. Also check your TV owner's manual to see if there are any
special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please online video at www.forgingmount.com
CAUTION:
Avoid potential personal injuries and property damage!
●
This product is designed for use in wood stud/concrete walls DO NOT install into d rywall
●
The wall must be capable of supporting fi ve times the weight of the TV and mount combined
●
Do not use this product for any purpose not explicitly specifi ed by manufacturer
●
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
TV Screws
Lag Bolts
M4 x 12mm
14 x4
1/4 in x 2 ¾ in.
x1
09 x4
Lag Bolt
W
ashers M6 x 12mm
15 x4
07 x3 10 x4
[ M8 x 16mm
concrete anchor]
16 x4
11 x4
M8 x 25mm
08 x1
17 x4
and over your TV hole pattern as shown - making sure the brackets are level.
04 05
on TV brackets 04 and 05 should be oriented to the outside edges.
T
05
T
04
alone
Spacers
M4 x 35mm
18 x4
22mm
2.5mm
x4
M6 x 35mm 23
22 x4
19 x4
TV Washers
M8 x 35mm
20 x4
24 x4 25 x4
21 x4
M8 x 50mm
a
Flat Back
14 15 16 17
24
25
b
Round Back / Extra Space
20 21
18 19
22
23
24
25