System Connections - Sherwood AX-5505 Operating Instructions Manual

AX5505(G-Eng)100204_AX5505(Eng).qxp 2010-02-23 오후 2:04 페이지 4

System Connections

• Do not connect the amplifier to the wall AC outlet when plugging and unplugging connection cords.
• Be sure to connect the white RCA pin cords to the L (left) and the red RCA pin cords to the R (right) jacks
when making connections.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the amplifier.
■CONNECTING AUDIO
COMPONENTS
• The TAPE1/MD IN/OUT jacks may also be connected to
the LINE OUT/IN jacks of an additional MD recorder.
• The TAPE2 MONITOR IN/OUT jacks may also be
connected to the LINE OUT/IN jacks of an optional graphic
equalizer.
■CONNECTING SYSTEM
CONTROL
• Connect this jack to the DIGI LINK jack of the
external Sherwood component that uses the
DIGI LINK II or III remote control system.
4