System Connections - Sherwood AX-5103 Introduction Manual

AX5103(G) 2007.8.17 4:43 PM 페이지 4

System Connections

• Do not connect the amplifier to the wall AC outlet when plugging and unplugging connection cords.
• Be sure to connect the white RCA pin cords to the L (left) and the red RCA pin cords to the R (right) jacks when making
connections.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the amplifier.
PHONO
�CONNECTING AUDIO
COMPONENTS
GND
PHONO CD TUNER
• The TAPE1/MD IN/OUT jacks may also be connected to
the LINE OUT/IN jacks of an additional MD recorder.
• The TAPE2 MONITOR IN/OUT jacks may also be
connected to the LINE OUT/IN jacks of an optional graphic
equalizer.
SN.
GND
AX-5103
MODEL NO.
INTEGRATED AMPLIFIER
ASSEMBLED IN CHINA
DESIGNED IN USA
TAPE 1 TAPE 2
CD TUNER DIGI LINK
/MD MONITOR
IN OUT IN OUT
TAPE 1 TAPE 2
/MD MONITOR
SPEAKER A
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
WARNING : SHOCK HAZARD-DO NOT OPEN.
SPEAKER B
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
�CONNECTING SYSTEM
CONTROL
DIGI LINK
• Connect this jack to the DIGI LINK jack of the
external Sherwood component that uses the
DIGI LINK II or III remote control system.
5
AC INPUT
230V~50Hz
190W
230V~50Hz
SWITCHED
100W(0.43A) MAX.
AC OUTLET