Riso Perfect Binder G10 200 User Manual page 43

5
Lift the B9 lever to open the glue
sheet cover.
Remove the remaining piece of the glue sheet.
6
Set the new glue sheet.
7
Remove the release liner of the glue
sheet and insert the end of the glue
sheet into the gap between the
rollers.
8
9
10
Glue sheet
Release
liner
Replacing the Consumables
Press the B10 lever to close the glue
sheet cover.
If the glue sheet is loosed, roll the glue sheet core to
tighten the sheet.
Remove the double-sided tape on
the rolling core and paste the end of
the release liner to the rolling core.
If the release liner is loosed, roll the rolling core in
the arrow direction to tighten the film.
Close the side cover.
• Dispose finished glue sheets, glue sheet core,
and rolling core film according to the regulations
in your local community.
Perfect Binder User's Guide
2
2-3