Table of Contents
Advertisement
Loading the Body Pages/
Cover (Manual Binding)
To bind up the booklet manually (offline), load the
printed covers and body pages into the Perfect
Binder. Load cover sheets into the cover sheet
inserter; body pages into the body sheet stacker.
Load one booklet amount of body pages.
• For more information on the operation of
manual binding, see the procedure in "Manual
Perfect Binding" (p. 1-10).
Loading the Body Pages
1
Slide the cover sheet inserter to
open, lifting the right lever.
2
Load the printed body pages into
the body sheet stacker.
The last
page
Glue part
Page 1
• Loading method varies depending on the
binding side.
- Left binding, top binding: Load the last page
top side up
- Right binding: Load the first page top side up
(p. 25 "Loading the paper for the manual
binding")
3
Close the cover sheet inserter.
Slide the cover sheet inserter, lifting the right lever.
• If you release the right lever when sliding the
cover sheet inserter to close, the stopper comes
in the way to closing. Lift the right lever again to
slide and close the cover sheet inserter.
Loading the Cover Sheet
• If either of the following images exist within
5 mm (7/32") from the cover binding margin, the
glue will not fix and cause the body pages to
peel off easily. Please be careful when you
create the cover.
- Solid black, thick color
- A ruled line thicker than 3 pt
1
Turn the lock lever to "Release" side
and spread the side guides.
Binding Preparations
Perfect Binder User's Guide
23
Advertisement
Table of Contents
