Part Names And Functions - Riso Perfect Binder G10 200 User Manual

Part Names and Functions

a Cover Sheet Inserter
Set cover sheets for manual binding.
b Side Guides
Slide to suit the cover width so that the paper is neatly
aligned.
c End Guide
Slide to suit the cover end so that the paper is neatly
aligned.
d Cover Sheet Inserter Open Lever
Use to slide the cover sheet inserter.
e Booklet Slot
Bound booklets are output.
f Front Cover
Open this cover to remove jammed paper or when
disposing the cutting trash in the cover sheet dust
box.
g Cover Sheet Dust Box
Collects the cover sheet dust (cutting trash).
h Body Sheet Stacker
Load the printed body pages into this part for manual
binding.
i Secondary Filter
Absorbs vaporized matters and odors generated in
the unit when warming up the glue.
j Side Cover
Open this cover to replace the consumables.
k Glue Sheet Cover
Use to hold and supply the glue sheet.
l Glue Sheet
Load the glue sheet used for binding.
m Rolling Core
Set the rolling core used to roll up the protect film of
the glue sheet.
n Main Power Switch
When the main power switch is on, the power of the
unit will turn on and off together with the power of the
printer.
o Output Tray
Booklets are output here.
p Eject Button
Press to eject the booklets.
Perfect Binder User's Guide
15