Table of Contents
Advertisement
Unit Status
Confirm the Perfect Binder's and the printer's
status. To perform perfect binding, it is required that
the power of the Perfect Binder is on and that the
glue is at a suitable temperature.
• The status of the Perfect Binder and printer can
be confirmed on both the operation panel and
the RISO Console. For more information on the
confirmation method on the RISO Console, see
the guides of the ComColor GD Series printer.
Change of Status of the Perfect
Binder
The Perfect Binder can operate in the four following
modes:
When the power of the Perfect Binder is turned on,
the Perfect Binder enters the sleep mode or the
warming up mode.
• Warming up mode
The Perfect Binder heats the glue and the glue
tank. When the both of them reaches to the
suitable temperature, it goes to the stand-by
mode and the Perfect Binder is ready to bind up.
• Stand-by mode
The unit is ready for binding.
• Cooling down mode
When a binding job is not started within the time
set by the administrator, the unit enters a mode
of lowering the temperature of the glue heater in
order to prevent the deterioration of the glue.
• Sleep mode
The glue and glue tank will not be heated.
In other than the stand-by mode, the Perfect
Binder will start warming up the glue and glue
tank when a binding job is sent. At the time when
the both of them reaches to the suitable
temperature, the binding begins.
22
■ Relationship between the status of
the unit and the binding operations
The relationship between the status of the unit and the
binding operations are as follows:
View
Unit Status
Warming up
Warming up
(Binding
mode
unavailable)
Ready to start
Stand-by mode
binding.
Cooling down
Cooling down
(Binding
mode
unavailable)
Sleeping
Sleep mode
(Binding
unavailable)
• The time until the unit transitions to the cooling
down mode or the sleep mode can be
configured in the "Admin Menu Settings".
(p. 1-11 "Perfect Binder Settings")
Binding
Operation
N/A
N/A
N/A
Perfect Binder User's Guide
Advertisement
Table of Contents
