Table of Contents
Advertisement
13. Using additional handsets
You can use up to five D1111 additional handsets with your D1111 base
to extend your phone system without needing to install extension sockets
for each new phone.
Your D1111 handset can also be registered to up to 3 other bases. You
can then select the base you would prefer to use.
If you have purchased a D1111 multiple pack any additional handsets
come pre-registered to the base.
If you have purchased an additional handset separately you must register
it to your D1111 base before it can be used.
Registering an additional handset
At the base:
p
1. Press and hold
for 2 seconds until the base Power starts flashing.
The base will remain in registration mode for 90 seconds.
At the handset:
1. If the handset is new and the display shows
u
Registration
Scroll
to
. Press
Or
If the handset has already been registered to another base the
standby display is shown. Press
Select
press
.
Register Handset
2.
is highlighted. Press
3. Bases are displayed. If necessary, scroll
wish to register your D1111 handset to and press
4. Enter the system PIN and press
Searching Base X
5. The display shows
Handset Registered
number) then
The handset is automatically assigned the next available handset
number.
If registration is not successful first time, please repeat the process again
in case the base registration period ran out of time.
If there are already 5 handsets registered to the base, the registration will fail.
You must de-register another handset before you can register the new one.
36
Please Register
. Press
Select
.
u
d
Menu
Registration
, scroll
or
to
Select
.
u
d
or
to a new base you
Select
.
OK
. (Default setting = 0000)
(where X is the chosen base
.
Select a base
If your D1111 handset is registered to more than one base, you can select
which base to use.
u
Menu
1. Press
, scroll
d
Select Base
2. Scroll
to
3. All base numbers are displayed.
handset was previously registered to. Scroll
Select
want and press
Searching Base...
4. Display shows
De-register a handset
Use one handset to de-register another. You cannot de-register the
handset you are using.
u
Menu
1. Press
, scroll
d
De-register
2. Scroll
to
3. Enter the system PIN and press
u
d
4. Scroll
or
to the handset you want to de-register and press
Yes
5. Press
to confirm or
Menu
.
Back
6. Press
to return to the previous menu level or
standby.
and
d
Registration
Select
or
to
and press
Select
and press
.
(In use)
is added to bases where the
u
d
or
to the base you
.
. then the standby display for that base.
d
Registration
Select
or
to
and press
Select
and press
.
OK
. (Default setting = 0000)
No
to cancel.
>
Using additional handsets
.
.
Select
.
to return to
- Quick Links:
- Setting up
Hide quick links:
Advertisement
Table of Contents
