Page 2
Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt...
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775- 0703 for a replacement • Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
Page 4
Diagram and Parts List A. Faucet Body B. Aerator C. Flange D. Metal Washer E. Lock Nut F. Spanner Key G. Hex Wrench...
Page 5
Diagram and Parts List-Lift Rod Drain h i j k f. Mounting Nut k. Retaining Nut a. Waste Stopper b. Drain Flange g. Tail Pipe l. Clip c. Rubber Washer h. Top Hat Washer m. Extender Rod d. Concave Washer i.
Page 8
Step 1: Remove lock nut Shut off the water supply. Remove the lock nut (E) from the faucet (A). Step 2: Installing the faucet Before installation, ensure that the flange (C) is placed on the bottom of the new faucet (A). Place faucet (A) through the hole in sink.
Page 9
Step 3: Connect waterlines to main valve Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) NOTE are installed before connecting to the main valve. Step 4A: Installing the drain Remove waste stopper (a) and drain flange (b) from tailpipe (g).
Page 10
Step 4B: Installing the drain Insert drain flange (b) through drain hole with rubber washer (c) attached. From underneath, place concave (d) and metal washer (e) on drain flange. Secure with mounting nut (f). Thread tailpipe (g) onto drain (b) and hand tighten. Step 4C: Installing the drain Insert waste stopper (a) into drain flange.
Page 11
Step 4D: Installing the drain Insert lift rod (o) through spout and connect with extender rod (m). Tighten thumb screw (n). Step 4E: Installing the drain Attach drain off pole (i) to extender rod (m) with clip (I).
Page 12
Step 4F: Installing the drain Loosen thumb screw (n) on extender rod (m). Push down on lift rod (o) until stopper is in open position. Retighten thumb screw (n). Step 5: Flush faucet After installing faucet, remove aerator (B) with a coin. Turn water on for 30 seconds to remove any debris.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps: P R O B L E M C A U S E A C T I O N Leakage under the Bonnet nut (5) has Remove the cover button (1).
Page 15
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Page 16
12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com...
Page 17
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...