Download Print this page

Kraus Esta KBF-1211-2PK Installation Manual

Single handle lavatory faucet

Advertisement

Quick Links

INSTALLATION GUIDE
Esta™ Single Handle Lavatory Faucet
KBF-1211
www.kraususa.com
I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. FEB 26, 2020

Advertisement

loading

Summary of Contents for Kraus Esta KBF-1211-2PK

  • Page 1 INSTALLATION GUIDE Esta™ Single Handle Lavatory Faucet KBF-1211 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. FEB 26, 2020...
  • Page 2 Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt...
  • Page 3: Prior To Installation

    Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775- 0703 for a replacement • Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure •...
  • Page 4 Diagram and Parts List A. Faucet Body B. Aerator C. Aerator Key D. Metal Washer E. Lock Nut F. Spanner Key G. Hex Wrench...
  • Page 5 Diagram and Parts List-Lift Rod Drain h i j k f. Mounting Nut k. Retaining Nut a. Waste Stopper b. Drain Flange g. Tail Pipe l. Clip c. Rubber Washer h. Top Hat Washer m. Extender Rod d. Concave Washer i.
  • Page 6 Faucet Dimension 6 1/4" [159.2mm] 2 1/8" 4 3/4" [54.6mm] [120.3mm] M18.5X1.0-6g 1 7/8" [47.8mm] 3/8” compression Installer Tip:...
  • Page 7 Drain Dimension 2 1/8” Ø [Ø54.0mm] 1 1/4-18UNEF-2A 5 5/8” [141.6mm] 1 1/4” Ø [Ø32.0mm] Installer Tip:...
  • Page 8 Step 1: Remove lock nut Shut off the water supply. Remove the lock nut (E) from the faucet (A). Step 2: Installing the faucet Place faucet (A) through the hole in sink. Secure the faucet (A) to the sink using the metal washer (D) and lock nut (E) provided.
  • Page 9 Step 3: Connect waterlines to main valve Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) Step 4A: Installing the drain Remove waste stopper (a) and drain flange (b) from tailpipe (g).
  • Page 10 Step 4B: Installing the drain Insert drain flange (b) through drain hole with rubber washer (c) attached. From underneath, place concave (d) and metal washer (e) on drain flange. Secure with mounting nut (f). Thread tailpipe (g) onto drain (b) and hand tighten. Step 4C: Installing the drain Insert waste stopper (a) into drain flange.
  • Page 11 Step 4D: Installing the drain Insert lift rod (o) through spout and connect with extender rod (m). Tighten thumb screw (n). Step 4E: Installing the drain Attach drain off pole (i) to extender rod (m) with clip (I).
  • Page 12 Step 4F: Installing the drain Loosen thumb screw (n) on extender rod (m). Push down on lift rod (o) until stopper is in open position. Retighten thumb screw (n). Step 5: Flush faucet After installing faucet, remove aerator (B) with included aerator key (C). Turn water on for 30 seconds to remove any debris.
  • Page 13: Replacement Parts

    Replacement Parts Replacement Parts List Finish / Color Part # 1. Cover Button GR, BL* KP27002 2. Set Screw KP27001 SFS, MB, GM, 3. Handle KP27150 BG, SFSB* SFS, MB, GM, 4. Cap KP27151 BG, SFSB* 5. Bonnet Nut KP27152 6.
  • Page 14: Troubleshooting

    Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps: P R O B L E M C A U S E A C T I O N Leakage under the Bonnet nut (5) has Remove the cover button (1).
  • Page 15 Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
  • Page 16 Rico shipping charges may apply). International shipping fees are not included. Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
  • Page 17 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...