Remington i-LIGHT PRESTIGE Manual page 17

ENGLISH
, The power switch is ON, but the unit is not working.
, The unit appears to have cracks or is broken.
contact the Remington® Service Centre for further assistance.
, I have switched the unit ON, but I cannot increase or decrease the energy level.
, The Bulb Status Indicator Light turns green but the unit does not flash when the button is pressed.
, There is a strange smell.
, The treated areas become red after treatment.
, BE AWARE: If the unit is used over an extended period of time, the unit might automatically disable
momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down, it will be ready to
use again.
All currently selected energy level
indicators lashing.
All energy level indicators
lashing.
LED's
All LED's lashing with warning
beep.
Unit is overheated and is disabled
momentarily to cool down.
Unit is malfunctioning. Turn the
unit of, wait a few moments and
try again. If problem persists, the
unit should be returned for repair.
Treatment head is removed or
loose.
17