Remington i-LIGHT PRESTIGE Manual page 14

ENGLISH
the Flash Window and other components.
Your i-LIGHT device will automatically be set to Single Flash Mode each time the device is powered ON.
precision treatments of the face and small areas.
lash every 3 seconds when the skin contact sensors are fully engaged. The Multi-Flash mode allows
you to quickly treat large areas by simply gliding the hand piece over the skin after each lash.
, How to treat:
Place the Flash Window irmly against the skin - ensure the Skin Contact Sensors are fully engaged.
, NOTE: When the Skin Contact Sensors are fully engaged you will hear a 'chirp' and the Bulb Status
Indicator Display will illuminate green.
2 Press the lash button to deliver a lash. You should expect to see a bright lash of light (similar to a
camera lash), and you should feel a mild sensation of warmth.
3 Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
area being sure to keep the Skin Contact Sensors fully engaged. The next lash will be delivered
automatically after 3 seconds.
, NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact,
simply resume treatment by repeating the above steps.
, Facial Treatment (female use only)
Facial hair can be very diferent to body hair and the skin on the face tends to be
sensitive and more likely to be exposed to the sun's UV rays; therefore treating
Warnings and Safety Precautions carefully before beginning a facial treatment.
, IMPORTANT: The Facial Attachment has been specially designed to treat the unique
characteristics of female facial hair. DO NOT use the Body or Bikini Attachments on
the face. See section 'Changing Attachments' for more information.
14
Fig. 9
Fig. 10