Remington i-LIGHT PRESTIGE Manual page 12

ENGLISH
, PREPARE THE i-LIGHT FOR USE
Unwrap the hand piece cord from the i-LIGHT base and rest the hand piece back on the base unit.
, SELECTING THE ENERGY LEVEL
The i-LIGHT is equipped with 5 energy levels. Level 1 is the lowest setting and level 5 is the highest
setting.
, TIP: For the most effective results, always use the highest energy level that does not cause discomfort
on the skin.
Level Display (fig. 6).
LIGHT will automatically be set to Energy Level 1 each time the device is powered ON. To change
the level, press the Energy Level Selection Button.
, TEST THE i-LIGHT ON YOUR SKIN
, Before your first full treatment, test the i-LIGHT on a small patch of skin and wait 24 hours to
ensure there are no adverse reactions.
Start at energy level 1.
1 Place the i-LIGHT hand piece against your skin so the Flash Window is flush with the skin surface.
2 Ensure the Skin Contact Sensors are fully engaged and the Bulb Status Indicator Display is illuminated
green (Fig. 7).
12
Fig. 5
Fig. 6