Wilfa XPLODE Instruction Manual page 56

8 P.
To switch on the appliance, turn the knob to "ON" position. The "ON" light
will be illuminated.
To control the speed, turn the knob at between "MIN" & "MAX" position.
The light will be illuminated at the desired position.
To use the quick function, turn the knob to "ON" position. The light on the
three buttons will start to blink.
Crush ice button
Press this button to crush ice. The appliance starts crushing according to the
pre-set speed profile.
Press the button again to stop the process or wait for the unit to stop
automatically after running for 30 seconds.
Warning:
Do not add more than than 8pcs ice cubes (less than 20 x 20 x 20mm size
of the ice) in glass jar at a time.
Smoothie button
Press this button to make delicious smoothies. The appliance starts mixing
according to the pre-set speed profile. Press the button again to stop the
process or wait for the unit to stop automatically after running for one
minute.
Auto clean button
Press the button to run the Auto mode. The appliance starts operating
according to the pre-set speed profile. Press the button again to stop the
process or wait for the unit to stop automatically after running for 45 seconds.
This function can be used to clean the product; you have to use water in
the jar.