Ronda Christina London Quick Manual

2 1
Cal. 4210.B
2 1
Cal. 4210.B
2 1
English
Cal. 4210.B
English
User's Manual
For model
User's Manual
504 + 506

Description of the display and control buttons

English
Description of the display and control buttons
User's Manual
Display elements 4210.B
Display elements 4210.B
Date
Description of the display and control buttons
Date
Minute hand
Minute hand
2 1
2 1
Hour hand
Display elements 4210.B
Hour hand
Second hand
Second hand
Date
Small
Small Minute hand
hour hand
hour hand
Hour hand
Small Second hand
Small
minute hand minute hand
Small
hour hand
Small
Control buttons
minute hand
Control buttons
Push-button
Push-button
Control buttons
Crown
Crown
Push-button
Crown
Setting the 2 nd time zone
Setting the 2 nd time zone
Setting the 2 nd time zone
4210.B
4210.B
4210.B
2 1
2 1
2 1
4210.B Second 4220.B
Small second
2 1
4210.B Second 4220.B
Small second
2 1
I
4210.B Second 4220.B
Small second
2 1
2 1
I II
2 1
2 1
I II
2 1
I
2 1
2 1
2 1 I II
2 1
1 7 Crown
I II
2 1
I
1 7
Crown
1 7
4210.B
Date pos. 12h
0 3
I II
1 7 Crown
1 7
I II
0 3
4220.B
4210.B
Date pos. 6h
Date pos. 12h
I II
0 3
1 7
I II
4210.B
0 3
Date pos. 12h
0 3 4220.B
Date pos. 6h
User Manual Dual Time model 504 + 506
I II
0 3
Cal. 4220.B
Cal. 4220.B
2 1
2 1
Cal. 4220.B
2 1
Display elements
Display elements 4220.B
Minute hand
Minute hand
Hour hand
Hour hand
Small
Display elements 4220.B
Small
hour hand
hour hand
Minute hand
Small
Small
Hour hand
minute hand
2 1 minute hand
Small
Second hand
Second hand
hour hand
2 1
Small
Date Date
minute hand
Second hand
2 1
Control buttons
Date
Control buttons
Push-button
Push-button
Control buttons
Crown
Crown
Push-button
Crown
4220.B
4220.B
4220.B
Cal. 5030.D
2 1
2 1
English
User's Manual
2 1
2 nd time zone
nd
2 time zone
2 nd time zone

Setting the time

Setting the time *Pull out the crown to position III
(the watch stops).
*Pull out the crown to position III
II III
Setting the time
(the watch stops).
Turn the crown until you reach the correct
time 8:45.
III
*Pull out the crown to position III
Turn the crown until you reach the correct
(the watch stops).
*Push the crown back into position I.
time 8:45.
Please note:
III
* In order to set the time to the exact second,
Turn the crown until you reach the correct
*Push the crown back into position I. must be pulled out when the second
II III time 8:45.
hand is in position «60».
Once the hour and minute hands have been
set, must be pushed back into position I
Please note:
at the exact second.
* In order to set the time to the exact second,
*Push the crown back into position I.
must be pulled out when the second
III
hand is in position «60».
Once the hour and minute hands have been
Please note:
set, must be pushed back into position I

Setting the date/time

at the exact second. * In order to set the time to the exact second,
must be pulled out when the second
Example:
III
hand is in position «60».
– Date / time on the watch: / 1:25 AM
17
– Present date / time: Once the hour and minute hands have been / 8:30 PM
04
set, must be pushed back into position I
II
Pull out the crown to position II
Setting the date/time
at the exact second.
(the watch continues to run).
Example:
– Date / time on the watch: / 1:25 AM
Turn the crown until yesterday's date
17
– Present date / time: appears / 8:30 PM
03
04
Setting the date/time
Pull out the crown to position II
(the watch continues to run).
Example:
– Date / time on the watch:
– Present date / time:
Turn the crown until yesterday's date
appears
03
Pull out the crown to position II
(the watch continues to run).
Turn the crown until yesterday's date
appears
03
Ronda aG
CH-4415 Lausen/Switzerland
Ronda aG
www.ronda-startech.com
CH-4415 Lausen/Switzerland
www.ronda-startech.com
Ronda aG
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
CH-4415 Lausen/Switzerland
Accuracy: +20 / -10 seconds per month
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
www.ronda-startech.com
Accuracy: +20 / -10 seconds per month
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
Accuracy: +20 / -10 seconds per month
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
4220.B
2 1
Any 2nd time zone can be set using the small
hour hand and small minute hand.
Any 2nd time zone can be set using the small
Any 2nd time zone can be set using the small
hour hand and small minute hand.
hour hand and small minute hand.
Activation: Press the push button for at
least 2 seconds.
Activation: Press the push button for at
Activation: Press the push button for at
least 2 seconds.
As soon as the samll minute hand
least 2 seconds.
As soon as the samll minute hand
jumps forward one minute, this mode
As soon as the samll minute hand
jumps forward one minute, this mode
of operation is activated.
of operation is activated.
jumps forward one minute, this mode
of operation is activated.
Brief pressing: (less than 1 second)
Brief pressing: (less than 1 second)
Moves forward individual minutes. Moves forward individual minutes.
Brief pressing: (less than 1 second)
Medium pressing: (1 to 2 second)
Medium pressing: (1 to 2 second)
Moves forward individual minutes.
Moves forward 1 hour.
Moves forward 1 hour.
Long pressing (longer than 2 seconds)
Medium pressing: (1 to 2 second)
Long pressing (longer than 2 seconds)
The time zone is moved forward until the
Moves forward 1 hour.
The time zone is moved forward until the
push button is released.
push button is released.
Long pressing (longer than 2 seconds)
Please Note
The time zone is moved forward until the
If the push button is not pushed for ten
Please Note
seconds, the setting mode is deactivated.
push button is released.
If the push button is not pushed for ten
Please see point no for activation.
Description of the display and control buttons seconds, the setting mode is deactivated.
Please Note
Please see point no
If the push button is not pushed for ten
seconds, the setting mode is deactivated.
Display elements
Please see point no 4210.B
Date pos. 12h
Second hand
3 1
4210.B
Minute hand
Date pos. 12h
Hour hand 3 1
I II
Centre stop-second
Minute counter 3 1
4220.B
3 1
Date pos. 6h
Hour counter
Date
3 1
0 1
4220.B
Date pos. 6h
3 1
I II
0 1
Minute counter Push-button A Chronograph:
0 1
Accumulated timing
Example:
Start: (start timing)
0 1
Stop: (e.g. 15 min
Restart: (timing is resumed)
0 1
4210.B Second 4220.B
*
Stop: (e.g. 13 min
Small second
Hour counter 0 3
(The accumulated measured time is shown)
Reset:
The three chronograph hands are returned
0 1
to their zero positions.
I II III
4210.B Second 4220.B
Please note:
0 3
Small second
* Following
0 3
timing can be continued by pressing push-
button A
(Restart / Stop, Restart / Stop, ...)
Push-button B
0 4
4210.B Second
Adjusting the chronograph
Minute counter Center 0 3
0 3
stop-second
hands to zero position
I II III
/ 1:25 AM Example:
17 0 4
One or several chronograph hands are not in
/ 8:30 PM
04
their correct zero positions and have to be
adjusted (e.g. following a battery change).
I II III
0 4
Pull out the crown to position III (all 3
chronograph hands are in their correct or
0 3
Hour counter
incorrect zero position).
Push-button A
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds
0 4
(the centre stop-second rotates by
0 4
360°
III
Push-button B
0 4
Setting the time
Second hand
Ronda aG
CH-4415 Lausen/Switzerland
www.ronda-startech.com
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
Accuracy: +20 / -10 seconds per month
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
Minute counter
for activation.
Control buttons

Setting the date (quick mode)

for activation.
Setting the date (quick mode)
Pull out the crown to position II (the watch
Push button A continues to run).
Hour counter
Crown
Pull out the crown to position II (the watch
Turn the crown until the correct
4210.B Setting the date (quick mode)
continues to run).
date appears.
01
Push button B
Date pos. 12h
Push the crown back into position I.
Turn the crown until the correct
I II
Pull out the crown to position II (the watch
date appears.
01
continues to run).
Please note:
During the date changing phase between
Push the crown back into position I.
9 PM and 12 PM; the date must be set to the
Turn the crown until the correct
I II
date of the following day.
date
01
An extreme acceleration in setting the date
Please note:
with quick mode can induce a false date indi-
4220.B During the date changing phase between
cation. The synchronization is re-established Minute counter
Push the crown back into position I.
Date pos. 6h 9 PM and 12 PM; the date must be set to the
by setting the date from 01 till 31 (crown in
position II). date of the following day.
An extreme acceleration in setting the date
Please note:
I II
with quick mode can induce a false date indi-
5 sec following )
During the date changing phase between
cation. The synchronization is re-established
9 PM and 12 PM; the date must be set to the
by setting the date from 01 till 31 (crown in
5 sec following ) date of the following day.
position II).
= 28 min 10 sec
Hour counter
An extreme acceleration in setting the date
* Pull out the crown to position III
I II
(the watch stops).
with quick mode can induce a false date indi-
cation. The synchronization is re-established
Turn the crown until the correct date
by setting the date from 01 till 31 (crown in
appears.
04
position II).
**Continue to turn the crown until the
, the accumulation of the
correct time 8:30 PM appears.
* Pull out the crown to position III
(the watch stops).
Push the crown back into position I.
Turn the crown until the correct date
4220.B
appears.
I II III
04
Small second
Please note:
**Continue to turn the crown until the
* Pull out the crown to position III
* To set your watch to the exact second,
correct time 8:30 PM appears.
(the watch stops).
please refer to the chapter entitled «set-
ting the time».
Push the crown back into position I.
** Please observe the AM/PM clock rhythm.
Turn the crown until the correct date
I II III appears.
04
**Continue to turn the crown until the
correct time 8:30 PM appears.
Please note:
I II III
* To set your watch to the exact second,
Push the crown back into position I.
please refer to the chapter entitled «set-
ting the time».
corrective mode is activated).
** Please observe the AM/PM clock rhythm.
See more: www.christinadesignlondon.com Please note:
I II III
* To set your watch to the exact second,
please refer to the chapter entitled «set-
ting the time».
Chronograph: Basic function
Push-button A
(Start / Stop / Reset)
Example:
Start: Press push-button A.
Stop: to stop the timing, press push-
button A once more and read the three
chronograph hands: 1h / 20min / 10 se
Zero positioning:
Press push-button B.
(The three chronograph hands will be re
to their zero positions).
Push-button B
appears.
Push-button A Chronograph:
Intermediate or interval timin
Example:
Start: (start timing)
Display interval:
e.g. 10 minutes 10 seconds (timing
continues in the background)
*
Making up the measured time:
(the 3 chronograph hands are quickly
Push-button B
advanced to the ongoing measured tim
Stop: (Final time is displayed)
Reset:
The 3 chronograph hands are returned t
their zero position
Please note:
* Following , further intervals or inter-
mediates can be displayed by pressing
push-button B (display interval / make u
measured time, ...)
Push-button B
A

Adjusting the centre stop second

1 x short
Single step A
Continuous A long
B Adjusting the next hand B
A Adjusting the hour counter hand (position 6h
Single step A 1 x short
Continuous A long
Adjusting the next hand B
B
A Adjusting the minute counter hand (position
Single step A 1 x short
Continuous A long
Returning the crown to position I
I II III
Termination of the chronograph hands adjustment
(can be carried out at any time).
Setting the date (quick mode