Page 1
RONDA startech 4000 Multifunctions with Big Date, Alarm, 2nd Time Zone Caliber 4210.B – 12½''' Product Specifications Features Analog quartz movement – Repairable metal watch movement Line startech – Very long battery life Caliber 4210.B – Power saving mechanism with pullled out stem: Reduction...
Caliber 4210.B – 12½''' RONDA startech Functions Technical Specifications – 1 eye Diameter Total 28.60 mm – Multifunction Case fitting 28.00 mm – Second time zone Movement height 4.40 mm – Big date Height over standard battery 4.40 mm Movement rest 0.60 mm...
Page 3
10 : 1 (5 : 1) (A3H) the position must be fullfilled. For pusher angles Sous réserve de modifications of 0° (pusher A and B), see drawing 5000.345. cercle d'entourage Aenderungen vorbehalten RONDA 4210.B Gehäusering Modifications reserved movement holder No. 5000.331...
Page 4
Winkel der Drücker A und B 10° Released Angle of pusher A and B Tolerance +/- 20 µm Ø Dp 10° ±2 Scale 10 : 1 (5 : 1) (A3H) 20° Sous réserve de modifications Aenderungen vorbehalten RONDA 4xxx.x, 5xxx.x Modifications reserved No. 5000.345...
Page 6
0.07 0.80 0.80 0.03 0.03 Sous réserve de modifications Aenderungen vorbehalten RONDA 4210.B Inertie / Massenträgheit / Inertia * max. Modifications reserved Force de chassage / Aufpresskraft / Force max. No. 3316.084 * En cas de données différentes, veuillez contacter le service après-vente...
Page 7
Rallonge de tige / Stellwelle Verlängerung / Stem extension Released No. d'article Stem (dimensions / forces) Artikelnummer Tolerance (min) Part number 10:1 (A3) Scale 3000.040 12.00 1.90 2.60 0.90 0.90 1.35 4002.B, 4003.B, 4120.B, Sous réserve de modifications Aenderungen vorbehalten RONDA Modifications reserved 4210.B, 4220.B 5030.018...
Page 8
T2-Instructions 4210.B Fitting dial and hands • Crown in position II • Wind crown, until date 02 appears • Crown in position III • Wind hour hand forwards, until date changes to 03 • Remove working stem • Fit dial • Point all hands towards 12 o’clock • Set time Movement holder • Crown in position II Removing setting stem • Set date H5XXX.1T • Install second time zone** • Crown in position I General Instructions Date switching duration: Removing the setting stem can only be effected in Pos. I. First and tenth digit discs ~2hrs The use of supporting screws is...
/ 8:30 PM You have decided to buy a watch, which was assembled by a watch- Pull out the crown to position II maker using a Ronda movement. Please note that no watches are (the watch continues to run).
Need help?
Do you have a question about the startech 4000 and is the answer not in the manual?
Questions and answers