Ronda normtech 6203.B User Manual

User's Manual English
Movements Caliber
RONDA normtech RONDA mastertech
– 6203.B – 7003.L
– 7003.N
– 7004.N
– 7004.P
You have decided to buy a watch, which was assembled
by a watchmaker using a Ronda movement. Please note
that no watches are produced or distributed under the
Ronda brand.
In case of repairs, guarantee claims and questions
concerning the functioning of a watch, purchasers and
consumers should contact their retailer or the watch
manufacturer, for which the relevant information can
be found in the sales or guarantee documentation pro-
vided with the watch.
I II III
Cal. 6203.B
Crown A
Pos. I Position of rest (watch running)
Pos. II Quick-change correction for date
The date can also be corrected during the day-changing
phase between 10.00 pm and midnight. The date of the
following day has to be set, because no automatic date
change takes place at midnight.
– Pull the crown out to position II (watch still running).
– Turn the crown clockwise until the required date
appears.
– Push the crown back into position I.
Pos. III Setting the time (both time zones together)
– Pull the crown out to position III (watch stopped).
– Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
– Push the crown back into position I.
A
Crown B
Pos. I Position of rest
Pos. II Setting the time of the 2
During the time setting of the 2
crown A must be in position I.
– Pull the crown out to position II.
– Turn the crown, until the desired time is displayed.
– Push the crown back into position I.
Cal. 6203.B
nd time zone
nd time zone,