Description of the display and control buttons Cal. 5050.C Brief specifications Display elements Control buttons Time/Date • Hour hand Second hand • Minute hand • Small second hand (position 3h) Minute hand • Date (position 6h) Push-button A Weekday • Weekday (position 12h) Hour hand Crown Chronograph...
Setting the time Setting the date (quick mode) Second hand *Pull out the crown to position III Pull out the crown to position II (the watch ������������������� � ����������������������� � (the watch stops). continues to run). �...
Page 4
Setting the date, weekday and Second hand time * Pull out the crown to position III Crown (the watch stops). ������������������� � ����������������������� � Example: Turn the crown until the correct date – Date / time on the watch: / 01h25 / and weekday appears.
����������������������� � Chronograph: Chronograph: Basic function Minute counter Second counter • The chronograph’s hour counter measures times up to 12 hours. (Start / Stop / Reset) • The minute counter measures 30 minutes per rotation. ����������������������� � • The center stop-second measures 60 seconds per rotation.
Page 6
Second counter Second counter Chronograph: Chronograph: Minute counter Minute counter Accumulated timing Intermediate or interval timing Example: Example: ������������������� � ����������������������� � Push-button A Push-button A Start: (start timing) Start: (start timing) Display interval: ...
Page 7
����������������������� � ����������������������� � ����������������������� � Minute counter Centre stop-second Adjusting the chronograph Adjusting the centre stop second Single step 1 x short hands to zero position Continuous long ��� ��� Example: ����������������������� � ������������������� � ��� Adjusting the next hand B One or several chronograph hands are not ...
Need help?
Do you have a question about the Ronda Startech 5050.C and is the answer not in the manual?
Questions and answers