Ronda 3540D User Manual

Cal. 3540.D
English
User's Manual
Description of the display and control buttons
Display elements
Minute hand
Centre stop-second
1 ⁄ second counter
10
(hour counter after 30 minutes)
Minute counter
Hour hand
Second hand
Date
01
I II III
Second hand
I II III
02
I II
I II
03
Crown
I II
Date
I II
I II III
Second hand
I II III
04
Control buttons
Push-button A
Crown
Push-button B
Setting the time
* Pull out the crown to position III
(the watch stops).
Turn the crown until you reach the correct
time 8:45 .
* Push the crown back into position I.
Please note:
* In order to set the time to the exact second,
must be pulled out when the second
hand is in position «60» (I).
Once the hour and minute hands have been
set, must be pushed back into position
at the exact second.
Setting the date (quick mode)
Pull out the crown to position II (the watch
continues to run).
Turn the crown anticlockwise until the
correct date appears.
1
Push the crown back into position I.
Please note:
During the date changing phase between
08.30 PM and 12 PM; the date must be set to
the date of the following day.
Setting the date/time
Example:
– Date / time on the watch: / 1:25 AM
17
– Present date / time: / 8:30 PM
4
Pull out the crown to position II
(the watch continues to run).
Turn the crown anticlockwise until
yesterday' s date appears .
3
* Pull out the crown to position III
(the watch stops).
Turn the crown until the correct date
appears.
4
** Continue to turn the crown until the
correct time 8:30 PM appears.
Push the crown back into position
Please note:
* To set your watch to the exact second,
please refer to the chapter entitled
«setting the time».
** Please observe the AM/PM clock rhythm.
1 ⁄ second counter
10
Minute counter
05
1 ⁄ second counter
10
Minute counter
06
1 ⁄ second counter
10
Minute counter
I
07
1 ⁄ second counter
10
Minute counter
65,5% = 40mm Druchmesser
65,5% = 40mm Druchmesser
65,5% = 40mm Druchmesser
65,5% = 40mm Druchmesser
A
65,5% = 40mm Druchmesser
B
65,5% = 40mm Druchmesser
A
B
A
I II III
08
Battery type: 384 (diameter 7.9
Accuracy: +20 / -10 seconds per month
I.
Chronograph: Basic function
Push-button A
(Start / Stop / Reset)
Example:
Start: Press push-button
Stop: to stop the timing, press
push-button A once more and read
the 3 chronograph counters:
4 min / 38 sek /
Zero positioning:
Press push-button
(The 3 chronograph hands will be reset to
their zero positions).
Push-button B
Chronograph:
Accumulated timing
Example:
Start: (start timing)
Push-button A
Stop: (e.g. 15 min 5 sec following
Restart: (timing is resumed)
* Stop: (e.g. 13 min
=
(The accumulated measured time is shown)
Reset:
The 3 chronograph hands are returned to
their zero positions.
Please note:
* Following , the accumulation of the
timing can be continued by pressing
push-button A
(Restart / Stop, Restart / Stop, ...)
Push-button B
Chronograph:
Push-button A
Intermediate or interval timing
Example:
Start: (start timing)
Display interval:
e.g. 10 minutes 10 seconds
continues in the background)
Making up the measured time:
*
(the 3 chronograph hands are quickly
Push-button B
advanced to the ongoing measured time).
Stop: (Final time is displayed)
Reset:
The 3 chronograph hands are returned to
their zero position
Please note:
* Following , further intervals or inter
mediates can be displayed by pressing
push-button B (display interval / make up
measured time, ...)
Push-button B
Adjusting the chronograph
Centre stop-second
hands to zero position
Example:
One or several chronograph hands are not
in their correct zero positions and have to be
adjusted (e.g. following a battery change).
I II III
Pull out the crown to position
(all 3 chronograph hands are in their
correct or incorrect zero position).
Push-button A
Keep push-buttons
simultaneously
65,5% = 40mm Druchmesser
(the centre stop-second rotates by
360° corrective mode is activated).
III
65,5% = 40mm Druchmesser
Push-button B
Adjusting the centre stop second
A
Single step
A
Continuous
Adjusting the next hand B
III
Adjusting the 1 ⁄ second counter hand (position 6h)
10 III
A
Single step
A
Continuous
Adjusting the next hand
B
III
Adjusting the minute counter
III
A
Single step
A
Continuous
III
Returning the crown to position III
Termination of the chronograph hands
adjustment (can be carried out at any time).
mm x 3.6 mm / SR 41 SW)
A .
7 ⁄ sec
10
B .
)
5 sec following )
28 min 10 sec
(timing
-
III
A and B depressed
for at least 2 seconds
1 x short
long
III
1 x short
long
III
(position 9h)
1 x short
long
I
03/ 2013