Carrier AquaEdge 23XRV Installation Instructions Manual page 16

Table 3 — 23XRV Heat Exchanger Sizes A,B Dimensions (Nozzle-in-Head Waterbox)
HEAT EXCHANGER
SIZE
A
B
NOTE(S):
a. Service access should be provided per American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) 15, latest edition, National Fire Protection
Association (NFPA) 70, and local safety code.
b. Allow at least 3 ft (915 mm) overhead clearance for service rigging for compressor.
c. Certified drawings available upon request.
d. Marine waterboxes may add 6 in. (152 mm) to the width of the machine. See certified drawings for details.
e. 'A' length dimensions shown are for standard 150 psig (1034 kPa) design and Victaulic connections. The 300 psig (2068 kPa) design and/or flanges will add length. See
certified drawings.
f. Dished head waterbox covers are available only for 2-pass design.
g. 1 or 3 pass length applies if either (or both) cooler or condenser is a 1 or 3 pass design. The 2-pass length assumes both cooler and condenser nozzles on same end of chiller.
Table 4 — 23XRV Heat Exchanger Sizes A,B Dimensions (Marine Waterbox)
HEAT EXCHANGER
SIZE
A
B
NOTE(S):
a. Service access should be provided per ASHRAE 15, latest edition, NFPA 70, and local safety code.
b. Allow at least 3 ft (915 mm) overhead clearance for service rigging for compressor.
c. Certified drawings available upon request.
d. Marine waterboxes may add 6 in. (152 mm) to the width of the machine. See certified drawings for details.
e. 'A' length dimensions shown are for standard 150 psig (1034 kPa) design and Victaulic connections. The 300 psig (2068 kPa) design and/or flanges will add length. See
certified drawings.
f. Dished head waterbox covers are available only for 2-pass design.
g. 1 or 3 pass length applies if either (or both) cooler or condenser is a 1 or 3 pass design. The 2-pass length assumes both cooler and condenser nozzles on same end of chiller.
Table 5 — 23XRV Dimensions Heat Exchanger Sizes 30-57 (Nozzle-In-Head Waterbox)
HEAT EXCHANGER
SIZE
30 to 32
35 to 37
40 to 42, 4D
45 to 47, 4E
50 to 52
55 to 57
NOTE(S):
a. Service access should be provided per ASHRAE 15, latest edition, NFPA 70, and local safety code.
b. Allow at least 3 ft (915 mm) overhead clearance for service rigging for frame R compressor.
c. Certified drawings available upon request.
d. Marine waterboxes may add 6 in. (152 mm) to the width of the machine. See certified drawings for details.
e. 'A' length dimensions shown are for standard 150 psig (1034 kPa) design and Victaulic connections. The 300 psig (2068 kPa) design and/or flanges will add length. See
certified drawings.
f. Dished head waterbox covers not available for 3 pass design.
g. Assumes both cooler and condenser nozzles on same end of chiller.
Table 6 — 23XRV Heat Exchanger Sizes 30-57 Dimensions (Marine Waterbox)
HEAT EXCHANGER
SIZE
30 to 32
35 to 37
40 to 42, 4D
45 to 47, 4E
50 to 52
55 to 57
NOTE(S):
a. Service access should be provided per ASHRAE 15, latest edition, NFPA 70, and local safety code.
b. Allow at least 3 ft (915 mm) overhead clearance for service rigging for frame R compressor.
c. Certified drawings available upon request.
d. Marine waterboxes may add 6 in. (152 mm) to the width of the machine. See certified drawings for details.
e. 'A' length dimensions shown are for standard 150 psig (1034 kPa) design and Victaulic connections. The 300 psig (2068 kPa) design and/or flanges will add length. See
certified drawings.
f. Assumes both cooler and condenser nozzles on same end of chiller.
g. 1 or 3 pass length applies if cooler is a 1 or 3 pass design.
1-Pass
ft-in. mm
14- 6-3/4 4439 14- 1-1/4
16- 3-1/4 4959 15- 9-3/4
1-Pass
ft-in. mm
15- 9 4801 14- 6-1/2
17- 5-1/2 5322
A (LENGTH, WITH NOZZLE-IN-HEAD WATERBOX)
1-Pass
ft-in. mm ft-in.
14- 3-1/4 4350 13- 8-1/4
15-11-3/4 4870 15- 4-3/4
14- 9 4496 14- 3-1/8
16- 5-1/2 5017 15-11-5/8
14-10 4521 14- 4-1/2
16- 6-1/2 5042 16- 1
A (LENGTH, MARINE WATERBOX)
2-Pass f
ft-in. mm
14- 9 4496
16- 5-1/2 5017
15- 2-3/4 4642
16-11-3/4 5163
15- 3-1/2 4661
17- 0 5182
A (LENGTH) g
2-Pass
ft-in. mm ft-in.
4301 14- 6-3/4
4822 16- 3-1/4
A (LENGTH)
g
2-Pass
ft-in. mm ft-in.
4435 15- 5
16- 3 4955 17- 1-1/2
2-Pass g 3-Pass
mm ft-in.
4172 14- 3-1/4
4693 15-11-3/4
4347 14- 6
4867 16- 2-1/2
4382 14- 6-1/2
4902 16- 3
1 or 3-Pass g
ft-in.
16- 4-3/4
18- 1-1/4
16- 3-1/4
18- 4-3/4
16- 8-1/2
18- 5
16
a,b,c,d,e,f
3-Pass B (WIDTH)
mm
4439
See unit certified drawings
4959
a,b,c,d,e,f
3-Pass B (WIDTH)
mm
4699
See unit certified drawings
5220
a,b,c,d,e,f
B (WIDTH)
mm
4350
4870
See unit
4420
certified
4940
drawings
4432
4953
a,b,c,d,e
B (WIDTH)
mm
4997
5518
See unit
5086
certified
5607
drawings
5093
5613
C (HEIGHT)
C (HEIGHT)
C (HEIGHT)
C (HEIGHT)