Pin Assignments - Metrologic Orbit MS7100 Installation And User Manual

Appendix C

Pin Assignments

Pin Assignments for the PowerLink Cable
The MS7100 scanner interfaces terminate to a 10-pin modular jack.
Connect the 10-pin modular plug of the PowerLink cable into the jack
then connect the other end of the PowerLink cable to the host. (Refer
to page 6 for details). Due to the variations in current supplied by the
many available PC's, Metrologic suggests the use of an external power
supply.
"9" OCIA
PIN FUNCTION
1 Ground
2 RS-232 Transmit Output
3 RS-232 Receive Input
4 RDATA
5 RDATA Return
6 Clock in
7 Clock out
8 Clock in Return/Clock out Rtrn
9 +5VDC
10 Shield Ground
"67" RS-232/LTPN*
PIN FUNCTION
1 Ground
2 RS-232 Transmit Output
3 RS-232 Receive Input
4 RTS Output
5 CTS Input
6 DTR Input/LTPN Source
7 Reserved
8 LTPN Data
9 +5VDC
10 Shield Ground
*Preliminary
Options listed are program/cable selections
"11" IBM 46XX/RS-232*
PIN FUNCTION
1 Ground
2 RS-232 Transmit Output
3 RS-232 Receive Input
4 RTS Output
5 CTS Input
6 DTR Input
7 IBM 46XX Transmit
8 IBM 46XX Receive
9 +5VDC
10 Shield Ground
"41" RS-232/LTPN
PIN FUNCTION
1 Ground
2 RS-232 Transmit Output
3 RS-232 Receive Input
4 RTS Output
5 CTS Input
6 DTR Input/LTPN Source
7 Reserved
8 LTPN Data
9 +5VDC
10 Shield Ground
33