Scanner Parts - Metrologic Orbit MS7100 Installation And User Manual

Scanner Parts

Green and Red LEDs: When the red LED is on, this
indicates that the laser is on. When the green LED flashes on,
the scanner has read a bar code successfully. When the green
light turns off, communication to the host is complete. The
LEDs are also used as diagnostic indicators and mode
indicators. Refer to pages 9-11 for details.
ú
þ
Orbit Face:
o
Tilts 30 vertically
for variable position-
ing of the scan pattern.
º
Output Window:
Laser light emits
from this aperture.
Side View
8
ü
Cable Connection:
The MS7100 scanner
has a 10-pin modular
jack. The PowerLink
cable will connect its
10-pin modular plug
into the jack. Refer to
pages 5-7 for specific
protocol PowerLink
cable connections.
Top View