Table of Contents
Advertisement
ASSEMBLY GUIDE
Attach the springs to the 3 point end of the spring arm with the eye nuts, threaded rods, nuts, and washers as
shown. Do not tighten yet as it will make assembly difficult later.
Figure 11 springs attached at both ends but not in tension
Swivel pin
Locate the swivel pin. This pin connects the three point hitch assembly and the support arm of the mower
together. The swivel pin allows the mower to swing back 90° for transport.
Figure 12 swivel pin
2022-01.0 IBEX EQUIPMENT CO.
8
Advertisement
Table of Contents
