Advertisement
Quick Links
FORTIS 4 PERSON
WORKSTATION
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides for markings.
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
hd@ironageoffice.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Iron Age Office FORTIS 4 PERSON WORKSTATION
Summary of Contents for Iron Age Office FORTIS 4 PERSON WORKSTATION
- Page 1 WORKSTATION Assembly Instructions Thank you for your purchase! Iron Age Office furniture is uniquely and individually fabricated. For this reason, your furniture is pre-assembled and labeled before shipping. Labels are marked on the underside of the furniture. Most furniture is then deconstructed prior to shipping.
- Page 2 HARDWARE Screws are shown actual size. You may receive extra hardware with your unit. Tools Required #3 Square Drive 14-10 LAG BOLT QTY: 68 SCREEN BOLT 3/8 Hex Drive QTY: 20 SCREEN NUT 15/16 Crescent Wrench QTY: 20 LEVELING FOOT 9/16 Crescent Wrench QTY: 9 TROUGH SCREW...
- Page 3 PARTS FRONT RIGHT TABBED LEG MAIN TOP FRONT SHARED LEG SECOND TOP FRONT LEFT TABBED LEG THIRD TOP CENTRAL SHARED LEG FOURTH TOP BACK LEFT TABBED LEG SUPPORT BAR TROUGH BACK SHARED LEG DIVIDER SCREEN BACK RIGHT TABBED LEG MODESTY PANEL STANDARD LEG...
- Page 4 ASSEMBLY STEP 1 Place wood tops face down on a clean surface. STEP 2 Align legs using markings on the underside of the wood tops. Tabbed legs should be placed so that tabs are facing each other. STEP 3 Secure legs to appropriate tops using 14-10 lag bolts with a #3 square drive.
- Page 5 ASSEMBLY STEP 4 Screw in (1) leveling foot in each leg. Screw in leveling foot into each leg with 9/16 crescent wrench. STEP 5 Attach screens to front tabbed legs with (4) screen bolts and (4) screen nuts. STEP 6 Flip M2 desk to an upright position.
- Page 6 ASSEMBLY STEP 7 Align divider screen to M2 top. Secure divider screen to underside of M2 top with (4) lag bolts on each side. secure divider screen with (4) 14-10 lag bolts on each side with a #3 square drive STEP 8 Flip M1 desk to upright position.
- Page 7 ASSEMBLY STEP 9 Attach screen to front tabbed legs of M1 desk with (4) screen bolts and (4) screen nuts. STEP 10 Attach screen to back tabbed legs of M4 desk with (4) screen bolts and (4) screen nuts. STEP 11 Flip M4 desk to upright position.
- Page 8 ASSEMBLY STEP 12 Flip M4 desk to an upright position. Secure but do not tighten bottom support bar with (2) screen bolts and (2) screen nuts. STEP 13 Align divider screen to M4 top. Secure divider screen to underside of M4 top with (4) lag bolts on each side.
- Page 9 ASSEMBLY STEP 15 Attach screen to back tabbed legs of M3 desk with (4) screen bolts and (4) screen nuts. STEP 16 Tighten both bottom support bars. STEP 17 Align troughs to underside of joined desks using markings. Screw in (6) trough screws into each trough using a #2 phillips drive.
-
Page 10: Care Instructions
STEP 18 Enjoy your desk! CARE INSTRUCTIONS To care for either wooden or metal surfaces of Iron Age Office products, gently wipe with a soft cloth dampened with water and a mild dishwashing liquid. Once satisfied, dry with a soft cloth.
Need help?
Do you have a question about the FORTIS 4 PERSON WORKSTATION and is the answer not in the manual?
Questions and answers