Iron Age Office KNIGHT RECEPTION Assembly Instructions

Desk l-shape

Table of Contents

Download this manual

KNIGHT RECEPTION

DESK L-SHAPE

Assembly Instructions

Thank you for your purchase!

Iron Age Office furniture is uniquely and individually

fabricated. For this reason, your furniture is pre-assembled

and labeled before shipping. Labels are marked on the

underside of the furniture. The furniture is then

deconstructed prior to shipping. Pieces that uniquely

correspond can typically be found on the same pallet.

Assembly is best completed by keeping the pieces that

correspond together. Clear your work area of anything that

could scratch furniture surfaces. If possible, cover your

work area with a clean, soft blanket. Carefully flip

any wooden tops over and inspect the bottom sides

for markings. Match legs, flat brackets, etc.

to the appropriate labels.

If you need further assistance of any kind,

Iron Age Office Operations Manager

678-725-1473 (c)

hd@ironageoffice.com

please contact:

Henry Dover

Table of Contents

Need help?

Do you have a question about the KNIGHT RECEPTION and is the answer not in the manual?

Page 1 DESK L-SHAPE Assembly Instructions Thank you for your purchase! Iron Age Office furniture is uniquely and individually fabricated. For this reason, your furniture is pre-assembled and labeled before shipping. Labels are marked on the underside of the furniture. The furniture is then deconstructed prior to shipping.
Page 2 HARDWARE Screws are shown actual size. You may receive extra hardware with your unit. Tools Required #3 Square Drive 14-10 LAG BOLTS 7/32 Hex Drive 3/8-16 x 3/8 BOLTS PARTS Depending on your transaction counter configuration, you may receive more or less parts than shown below. ANGLE BRACKET MAIN TOP...
Page 3 ASSEMBLY STEP 1 Align main and side shells. Secure main shell to side shell with angle bracket and (2) 3/8-16x3/8 bolts using a 7/32 hex drive at the top and bottom of joint. STEP 2 Align return shell to main shell and secure with 3/8-16x3/8 bolts and angle brackets like step 1.
Page 4 ASSEMBLY STEP 4 Align main top to assembled shell. Secure main top to assembled shell with lag bolts using a #3 square drive. STEP 5 Align return top to assembled shell and secure with lag bolts like step 4. Secure main top and return top together with a splice plate at connection and lag bolts.
Page 5 STEP 8 Enjoy your desk! CARE INSTRUCTIONS To care for either wooden or metal surfaces of Iron Age Office products, gently wipe with a soft cloth dampened with water and a mild dishwashing liquid. Once satisfied, dry with a soft cloth.