Iron Age Office FORTIS 4 PERSON L-SHAPE WORKSTATION Assembly Instructions Manual
Hide thumbs
Also See for FORTIS 4 PERSON L-SHAPE WORKSTATION:
- Assembly instructions manual (10 pages)
Advertisement
Quick Links
FORTIS 4 PERSON
L-SHAPE WORKSTATION
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides for markings.
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
hd@ironageoffice.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Iron Age Office FORTIS 4 PERSON L-SHAPE WORKSTATION
Summary of Contents for Iron Age Office FORTIS 4 PERSON L-SHAPE WORKSTATION
- Page 1 L-SHAPE WORKSTATION Assembly Instructions Thank you for your purchase! Iron Age Office furniture is uniquely and individually fabricated. For this reason, your furniture is pre-assembled and labeled before shipping. Labels are marked on the underside of the furniture. Most furniture is then deconstructed prior to shipping.
- Page 2 HARDWARE Screws are shown actual size. You may receive extra hardware with your unit. Tools Required #3 Square Drive 14-10 LAG BOLT QTY: 148 SCREEN BOLT 3/8 Hex Drive QTY: 16 SCREEN NUT 15/16 Crescent Wrench QTY: 16 LEVELING FOOT 9/16 Crescent Wrench QTY: 20 TROUGH SCREW...
- Page 3 PARTS SPLICE PLATE MAIN TOP LEFT TABBED LEG SECOND TOP SPLICE PLATE RIGHT TABBED LEG SPLICE PLATE THIRD TOP LEFT TABBED LEG FOURTH TOP RIGHT TABBED LEG SPLICE PLATE LEFT TABBED LEG SPLICE PLATE RETURN TOP RIGHT TABBED LEG SECOND RETURN TOP SPLICE PLATE LEFT TABBED LEG THIRD RETURN TOP...
- Page 4 ASSEMBLY STEP 1 Place wood tops face down on a clean surface. STEP 2 Align legs using markings on the underside of the wood tops. Tabbed legs should be placed so that tabs are facing each other. Screw in all legs with (4) 14-10 lag bolts in each leg.
- Page 5 ASSEMBLY STEP 4 Align splice plates to main tops using markings on the tops. Screw in (3) lag bolts into each splice plate with a #3 square drive to secure splice plate to appropriate desks. STEP 5 Attach screens to tabbed legs with (4) screen bolts and (4) screen nuts in each screen.
- Page 6 ASSEMBLY STEP 7 Flip and align R3 and R4 to M3 and M4. Screw in (3) lag bolts into each splice plate with a #3 square drive to secure splice plate to return desks. STEP 8 Align divider screen to M4 desk. Secure divider screen to underside of M4 desk with (4) lag bolts on each side with a #3 square drive.
- Page 7 ASSEMBLY STEP 10 Flip M2 desk to upright position. STEP 11 Align R2 between M2 and M4 desks. Secure with lag bolts into splice plates on the underside of R2. Secure R2 top to M4 and M2 desks with (3) lag bolts into shared splice plate with a #3 square drive.
- Page 8 ASSEMBLY STEP 12 Align M1 desk to M2 desk. Secure with lag bolts in shared divider screen. STEP 13 Align R1 between M1 and M3 desks. Secure with lag bolts into splice plates on the underside of R1. STEP 14 Align trough to underside of joined desks using markings.
-
Page 9: Care Instructions
STEP 15 Enjoy your desk! CARE INSTRUCTIONS To care for either wooden or metal surfaces of Iron Age Office products, gently wipe with a soft cloth dampened with water and a mild dishwashing liquid. Once satisfied, dry with a soft cloth.
Need help?
Do you have a question about the FORTIS 4 PERSON L-SHAPE WORKSTATION and is the answer not in the manual?
Questions and answers