Promeba PC-750 Series Maintenance Manual page 5

MAINTENANCE MANUAL //
Revision 2021/10
02
EVERY YEAR
☐ Check the fixation of the bed joints: these joints must be free to be able to carry out the movement, but
without the assembly losing cohesion. If this joint is not correctly assembled, it could cause damage
during use, in which case the Promeba technical service should be contacted to consider whether it
needs to be replaced.
☐ Check that the screws that connect the bed to the stretcher are properly tightened.
2.1.7 GENERAL:
☐ Check that all screws not specified above are properly tightened.
2.2 RAIL
2.2.1 GENERAL:
☐ Check that all the screws are properly tightened.
STRETCHER PC-750 + RAIL PB-720
5