Chapter 4: Using Icamview Utility To Setup Ip & Update Firmware; Section 1. Installing Icamview Utility - Mega System Tech iCAMView iCV-01a User Manual

Chapter 4: Using iCAMView Utility to Setup IP & Update
Firmware

Section 1. Installing iCAMView Utility

1. Insert the enclosed iCAMView CD into the CD-ROM drive. iCAMView setup will
auto run. The following menu will show up. Click on the buttons on the left to
install the programs you want.
iCAMView Utility - This is a program that helps the user perform quick
installation. It will detect the current configuration and take the user through
the necessary network setup.
a. Click the 'iCAMView Utility' button to commence installation.
b. After the step by step installation is completed, the iCAMView Utility
group will appear in Windows 'Start'
Group'. Click this to start the program.
iMultiView - This is a windows based program designed to allow user to
control a large number of iCAMView websites located either in a LAN or on a
WAN.
Read User's Manual - Click to read iCAMView's User Manual. You will
need Adobe Acrobat Reader v5.0 or higher.
Adobe Acrobat Reader v5.0 - This will install Acrobat Reader v5.0 on your
local hard drive.
Sun Jave / ActiveX - Install Sun Java for viewing the video image by Java, or
install the OCX for viewing by ActiveX.
iCAMView user manual
Chapter 4: Using iCAMView Utility to Setup IP & Update Firmware
Fig.7. iCAMView Utility Group
iCAMView Utility 'Program
-7-