Mega System Tech iCAMView iCV-01a User Manual page 55

:
Manually adds the iCAMView to be monitored.
"Access by iCAMView Address"
Enter
megateccn.myddns.com) or LAN IP of iCAMView (example:
192.168.0.30)
"Remote Port"
This is iCAMView UDP port.
"Access by Image Server". Enter the information as set in Section
2.4.6.
:
Highlight the iCAMView to be deleted from iMultiView's list. Click
"Yes" to confirm deletion of selected iCAMView.
iCAMView user manual
either the WEB,
Chapter 6: iMultiView
without the www (Example:
-52-