Chapter 2: Installation Procedure - Mega System Tech iCAMView iCV-01a User Manual

Chapter 2: Installation Procedure

Before you start using iCAMView, you will need to set-up both the hardware and
software. The following is a flow chart on the installation procedure:
1
2
3
4
5
iCAMView user manual
Connect iCAMView,
USB Camera and the Network cable
(Chapter 3)
Connect Network cable to ROUTER
/ HUB / xDSL modem
Install iCAMView Utility (Chapter 4)
and iMultiView (Chapter 6)
Use Internet Explorer (>5.0) to
access iCAMView Web Manager
(Chapter 5).
iCAMView set-up completed
Fig.6. iCAMView installation flowchart
Chapter 2: Installation Procedure
-4-